Nickel Wire DKRNT 0.025 KT NP-2

Ni wire 0.025 NP2

Chemical purity — 99,80%-99,89%

Nickel wire DKRNT 0.025 KT NP-2 is made of nickel NP-2  with chemical purity of at least 99.8%. Nickel wire DKRNT 0.025 NP-2 KT is used in microelectronics, electronics and microwelding. It can be also used as a bank instrument.

High-quality nickel wire, produced by our company, has a clean surface without any exfoliation, voids and cracks. Lubricant residues, surface roughness and a slight deviation in diameter (State Standard GOST 2179 - 75) are not considered disadvantage of quality. Nickel wire has a physically resistance of 880 to 1320 MPa, or 90 - 135 kgf/mm2.

The nickel wire that is produced is wound around coils. Each coil is to be composed of one segment of the wire (clause 5.3, GOST 2179 - 75 this is not followed by all manufacturers. By purchasing wires manufactured against State Standard (GOST), buyers are at risk of having trouble with the certification and appreciation of goods abroad, and a Letter of Credit. If more than one segment is wound, it will be difficult to determine the content of the coil. So there can be cases where the diameters of the nickel wires are different or even wire that are made of another metal under a few wraps of DKRNT 0.025 KT. 

The endings of the wire are safely fixed. When nickel wire is being transported, it is necessary to protect it from mechanical damage, chemicals and moisture as well. In consideration of this, our company paid carefulattention to the packaging: the surface of the wire is protected by wrapping paper. In addition, each coil is placed in a plastic container,this is a beneficial step that ensures good quality in different climatic conditions. Coils can be placed in a shockproof case at the request of the customer.